Description
- MagSlimâ„¢ LiDAR Navigation System: Accurately maps out your house in minutes, reducing omissions and repeated cleaning, and even works well in the dark.
- 4-Level Suction Modes: 2700Pa Strong Suction. Easily clean pet hair, daily messes, and more.
- Vacuum and Mop Combo: Vacuuming sucks up floating dust and mopping tackles sticky messes.
- Twin Side Brushes: Takes care of corners and edges while preventing dirt from splashing for a more thorough clean.
- 3-Hour Continuous Cleaning: 2600mAh battery for long-lasting cleaning.§
- Ultra-Slim 7.8 cm Design: Moves freely under furniture to reach hidden dirt and grime that can’t escape its sweep.
- Customisable Cleaning: Merge and separate areas, set a cleaning schedule, and customise clean modes for each room.
- Quiet Cleaning: Cleans your home without disturbing you or your pets with a working volume of 51dB.§
- Auto-Charging: Returns to the charging dock automatically when the battery gets low, and then restarts right where it left off.
- OTA Updates Supported: Upgrade to the latest firmware via Tapo App for a better experience. More features to come.
†Testing is conducted by Tapo Lab. Actual emptying intervals are subject to change due to usage and environmental factors.
‡ Testing is conducted by Tapo Lab according to IEC 62885-2:2016 / 5.8 standards, using Max mode with a full battery at the inlet of the suction fan blower. Actual results may vary according to the working status and home environment.
§ Testing is conducted by Tapo Lab using quiet vacuuming mode with a full battery. Actual results may vary according to the working status and home environment.
â–³Testing is conducted by Tapo Lab using Tapo RV20 Mop Plus with 2700Pa max suction compared to Tapo RV10 with 2000Pa max suction. Actual results may vary according to the home environment.
* Measuring is conducted by Tapo Lab using Tapo RV20 Mop Plus with a sweeping width of 383 mm under operation conditions, compared to Tapo RV10 with a sweeping width of 260 mm. Measurement results may vary according to measuring tools and production tolerances.
